Model | Power(KW) | Capacity(m³/min) | Pressure(Bar) | Dimension(mm) | Weight(kg) | OutletSize |
SCR420LB | 37 | 12 | 1.5-3 | 2400*1760*1700 | 2400 | DN80 |
55 | 4 | |||||
5 | ||||||
SCR530LB | 45 | 15 | 1.5-3 | 2400*1760*1700 | 2600 | DN80 |
55 | 4 | |||||
55 | 5 | |||||
SCR830LB | 63 | 21.5 | 1.5-3 | 2900*1860*1900 | 2900 | DN100 |
75 | 4 | |||||
90 | 5 | |||||
SCR950LB | 90 | 28.8 | 1.5-3 | 2900*1860*1900 | 3100 | DN100 |
110 | 4 | |||||
110 | 5 | |||||
SCR1500LB | 132 | 47.4 | 1.5-3 | 3300*2200*2100 | 5300 | DN150 |
160 | 4 | |||||
185 | 5 | |||||
SCR420LBPM | 37 | 3.6-12.0 | 1.5-3 | 2400*1760*1700 | 2500 | DN80 |
45 | 4 | |||||
45 | 5 | |||||
SCR530LBPM | 45 | 4.5-15.0 | 3 | 2400*1760*1700 | 2700 | DN80 |
55 | 4 | |||||
55 | 5 | |||||
SCR830LBPM | 63 | 6.45-21.5 | 3 | 2900*1860*1900 | 3100 | DN100 |
75 | 4 | |||||
90 | 5 | |||||
SCR950LBPM | 90 | 8.6-28.8 | 1.5-3 | 2900*1860*1900 | 3300 | DN100 |
110 | 4 | |||||
110 | 5 | |||||
SCR1300LBPM | 110 | 10.8-36.8 | 1.5-3 | 3400*2200*2100 | 4800 | DN150 |
110 | 4 | |||||
132 | 5 | |||||
SCR1500LBPM | 132 | 14.2-47.4 | 1.5-3 | 3400*2200*2100 | 5500 | DN150 |
160 | 4 | |||||
185 | 5 |
Note:
The capacity is measured as GB3853 standard.(equivalent to ISO1217 Annex C)
Standard voltage is 380V/50HZ/3P, other voltage is available.
The recommended best capacity range is 60%-100%.
Alpine/high altitude, high temperature, high humidity, high dust loads or other adverse working conditions will require specialized custom designs. These are available on special request.
We reserve the right to make changes and improvements to the design and appearance.
Specifications may change without prior notice.
PM motor in SCR Low Pressure Screw Air Compressor has high efficiency as compared to IE3 premium efficiency motors. High temperature permanent magnetic material is applied in the specially designed PM motors which has value-added benefits such as grease free maintenance, bearing free operation, low noise, low vibration and direct 1:1 coupling without transmission losses. Permanent magnet frequency conversion motor also ensures the protection from any de-magnetization problems that can occur due to excess heat. Energy efficient air-end in SCR low pressure screw air compressors can save energy up to 8% to 10%. Enhanced energy saving is based on the following working principle of low-pressure screw air compressor.
“When air demand is low, the low-pressure permanent magnet screw air compressor reduces the speed in order to maintain the correct flow demand. The compressor enters in the standby mode, if there is air demand stops, which saves further energy. As pressure drops below its set point, the compressor restarts and runs automatically.”This special series of screw air compressor offered by Hi TECH Machinery General Trading L.L.C provides the intelligent control for compressor through the latest generation intelligent touchscreen controller. User can easily program the pressure and scheduling timings which allow user to automatically start and stop the compressor to match the production times. Built-in real-time monitoring and remote operations are value-added characteristics in SCR’s latest touchscreen interface. The oil system has been specially designed which ensure to reduce maintenance downtime.
- Product Details
- Brand :
- Place of Origin : United Arab Emirates(Ajman, Dubai, Middle East)
- FOB Price : On Request
- Minimum Order Quantity : 1
- Supply Ability :
- Packaging & Delivery
- Packaging Detail : Exterior Protection.Wooden Crating.Secure Fastening.
- Delivery Detail : On Site Delivery.Installation.24/7 After Sales Service.