NUMAX STEELS - | E-Showroom
NUMAX STEELS - | E-Showroom
Brass hex bars are available in options of a wide range of alloys and in different material finishes. Being of superior finish quality, Numax Steel are supplying these brass round bars in varied finish options in terms of sizes, lengths, thickness and diameters so as to meet the different demands of the customers. Further, these can also be offered in different grades and thicknesses and are known for their superior tensile strength and corrosion resistance properties.
Chemical Requirements | HT1 | HT2 | |||
Copper | 56.0 - 60.0% | 56.0 - 61.0% | |||
Lead | 0.20 to 1.50% | 0.50 to 1.50% | |||
Iron | 0.20 to 1.25% | 0.20 to 1.50% | |||
Tin | 0.20 to 1.0% | 1.0% max | |||
Aluminum | 0.2% max | 0.30 to 2% | |||
Manganese | 0.25 - 2.0% | 0.50-2.0% | |||
Total Imp. | 0.50% max | 0.50% max | |||
Zinc | Remainder | Remainder |
Physical Properties | |||||
Condition | Size | T.S. MPa | EL% Min | T.S. MPa | EL% Min |
As manufactured | All Size | 430 min | 20% | 460 min | 20% |
Cold-worked & Stress | 10-40 | 480 min | 12% | 520 min | 12% |
Relieved | 40 above | 500 min | 15% |
Fabrication Properties | |||||
Capacity for being | |||||
Cold formed | Poor | Fair | |||
Hot worked | Good | Good | |||
Machinability Rating | 30% | 30% | |||
Resistance to Corrosion | Excellent | Excellent | |||
Suitability for soldering | Excellent | Fair | |||
Uses | |||||
HT1 is suitable for Soldering | |||||
Ht2 is suitable for Machining |